Q2008-C3 Standalone Access Control Reader
The Q2008-C3 is a standalone, single door controller, connecting electric strike or magnetic lock and a power supply. Opening door modes are Card only, Keypad only, and Card with Keypad. Card capacity up to 800 users. Programmable door release time is from 1~250 seconds .
Features:
- Standalone, single door control.
- Low Priced, connect an electric strike and power supply and you're done
- No Control Panels - Standalone Access Controller
- Easy and simple to use
- Has a flat back so it's easy to install on any flat surface
- Operating Mode: Card only, Keypad only, Card with Keypad.
- Card capacity is 800 users.
- Programmable door release time: 1~250 seconds
- Access code can be added or deleted by keypad management.
- Built-in electric buzzer for audible card entry and programming.
- Data is protected even after power failure.
- Machined housing in high durable.
- ISO Mifare one /EM-ID thin card or keyfob optional
Specifications
Display: Red-power pilot, Black-access granted, Yellow-Beep
Keypad: 3 x 4 Flat membranes
Power: DC12V 3Amp
Color: Black
Frequency: 13.56 MHz or 125 kHz
Temperature:(-10°C~70°C)
Humidity: 10%~90%RH
Dimensions: 88(L) x 32(W) x 108(H) mm
Box Dimensions: 140(L) x 95(W) x 45(H) mm
Weight :( 200g)
Reading range: Within 10cm
