Q2008-C3 Standalone Access Control Reader

The Q2008-C3 is a standalone, single door controller, connecting electric strike or magnetic lock and a power supply. Opening door modes are Card only, Keypad only, and Card with Keypad. Card capacity up to 800 users. Programmable door release time is from 1~250 seconds .

Features:

• Standalone, single door control.
• Low Priced, connect an electric strike and power supply and you're done
• No Control Panels - Standalone Access Controller
• Easy and simple to use
• Has a flat back so it's easy to install on any flat surface
• Operating Mode: Card only, Keypad only, Card with Keypad.
• Card capacity is 800 users.
• Programmable door release time: 1~250 seconds
• Access code can be added or deleted by keypad management.
• Built-in electric buzzer for audible card entry and programming.
• Data is protected even after power failure.
• Machined housing in high durable.
• ISO Mifare one /EM-ID thin card or keyfob optional

Specifications

Display: Red-power pilot, Black-access granted, Yellow-Beep

Keypad: 3 x 4 Flat membranes

Power: DC12V 3Amp

Color: Black

Frequency: 13.56 MHz or 125 kHz

Temperature:(-10°C~70°C)

Humidity: 10%~90%RH

Dimensions: 88(L) x 32(W) x 108(H) mm

Box Dimensions: 140(L) x 95(W) x 45(H) mm 

Weight :( 200g)

Reading range: Within 10cm