Specifications:
Dimensions: 76 x 43 x 13mm
Power requirement: 12DC at 100mA
A linear regulator is recommended
Support card: all 125kHz HID proximity card, such as HID prox II, HID fob card and more
Interface: wiegand 26/34
Reader range: 5 to 10cm
Frequency: 122 to 128kHz
Operating temperature:-30 to +60 degree
Operating humidity: 5 to 95% RH (relative humidity non-condensing)
Audio/visual indication: green, red, and buzzer signal output
Response time: less than 0.2 seconds
Cable length: 250mm
Weight: 60g
It starts with 2 green flashes on power up HID compatible card reader and remains red
When a HID proximity card is present to the reader
The LED will shortly flash green, this indicates that the proximity card was read properly by the reader
When the LED control signal is activated by access controller host, the LED changes to green
Beeper function: power up the HID compatible card reader, the beeper will activate 2 times when a HID proximity card is presented to the HID proximity card reader, a short beep will be emitted
This indicates that the HID, proximity card was read properly by the reader
