Specifications:

Dimensions: 76 x 43 x 13mm

Power requirement: 12DC at 100mA

A linear regulator is recommended

Support card: all 125kHz HID proximity card, such as HID prox II, HID fob card and more

Interface: wiegand 26/34

Reader range: 5 to 10cm

Frequency: 122 to 128kHz

Operating temperature:-30 to +60 degree

Operating humidity: 5 to 95% RH (relative humidity non-condensing)

Audio/visual indication: green, red, and buzzer signal output

Response time: less than 0.2 seconds

Cable length: 250mm

Weight: 60g

It starts with 2 green flashes on power up HID compatible card reader and remains red

When a HID proximity card is present to the reader

The LED will shortly flash green, this indicates that the proximity card was read properly by the reader

When the LED control signal is activated by access controller host, the LED changes to green

Beeper function: power up the HID compatible card reader, the beeper will activate 2 times when a HID proximity card is presented to the HID proximity card reader, a short beep will be emitted

This indicates that the HID, proximity card was read properly by the reader