ER80 QR Code Access Card Reader can work with all Door access control board with built in WG 26/34output.The user can open the door by RFID card or Mobile QR code.
Card Reader Technical Parameter
|
Size（L*W*H） |
86*86*42mm |
|
Material |
Case：PC identify panel：tempered glass |
|
Interface |
Wiegand26、34 、RS485、RS232、USB、TCP/IP optional |
|
Decoding support |
QR、one dimensional code |
|
Voltage |
Support 4-15V input |
|
Current |
800mA |
|
Reading directions |
Camera centric slant 45° |
|
Reading speed |
<200ms |
|
Reading range |
0-20CM |
|
Reading feature |
auto-induction, beep hint |
|
Light source |
With LED light source itself，anti-highlight interference |
|
Decode Mode |
Image decoding |
|
environment |
Temperature：-20~70℃ Humidity：10%~90% |
|
Operate system |
Windows(xp 7 8 10)、Linux |
|
Indicating status light |
Red-Work、Green-Feedback、Light Green-Internet |
|
Reading range |
3-6CM |
|
Reading card type |
EM or Mifare card |
Restore Factory Settings: Use sharp objects inserted into backside REST hole，release till reader automatically restarted.
Features:
1. DC 12V 1000MA
2. EM card or Mifare Card for choose
3. Identify printed or screen QR Code
4. Support 26/34 weigand output to third party Access Control system
5. RS232, RS485, USB virtual keyboard, USB virtual Serial port, HTTP output, MQTT output optional
Wire connection:
VCC：DC12； GND：DC12；D0:DATA0；D1:DATA1； LED:LED indicate； BEEP:Sound ；
TX/R+:RS232+/RS485+；
RX/R-:RS232-/RS485-；
SPK-、SPK+：not define；
RJ45：connect to network, PC software setting reader parameter；apply to HTTP mode
micro-USB：For USB virtual keyboard and USB virtual serial port mode communication.
Note:
1: do not connect the power to the SPK+ and SPK- ports;
2:Wiegand output, QR code shall comply with the principle of combination of 16 hexadecimal number 0~F, the QR code in accordance with this principle can heard a Beep, controller can receive the card data; QR code not in accordance with the principle can heard two beep, the controller can not receive the card data;
3: Wigand output, scanning QR code take number principle is high before, QR code automatically identified as 16 decimal;
4: WG34 output, QR code card number must be 4 bytes, insufficient in high fill 4 byte number with 0.
